Descriptions of Pin Shine Standard Part Numbers

     There are 5 categories in standard parts, and they are S, SB, C, P, & PB.

(1) S Stands for SMD (Surface-Mount Device)

         ＜Ex.> S – 19 0 1

               S-SMD

19-  represents core size, and we only take two most up-front numeric digits to represent the core size (EEL-19). 

01- represents Serial Numbers (start from 01)

(2) SB stands for SMD Base. (if body perimeter height is lower than core height)

                SMD Header (if body perimeter height is higher than core height)

         <Ex.> SB – 0 0 1

               SB-SMD BASE，SMD HEADER

01- represents Serial Numbers (start from 01)

(3) C stands for Clip (Clamp), Cover (Case, Cap), or Separator.

         < Ex.> C – 0 0 1

                C-CLIP，COVER，SEPARATOR

01- represents Serial Numbers (start from 01)

(4) P stands for PTH (Pin Through Hole)

         < Ex.> P – 20 0 1

               P-PTH

              20- represents core size, and we only take two most up front numeric digits to represent the core size(EF-20).

01- represents Serial Numbers (start from 01)

(3) PB stands for PTH Base (if body perimeter height is lower than core height)

 PTH Header (if body perimeter height is higher than core height)

          <Ex.> PB – 0 0 1

               PB-PTH BASE，PTH HEADER

               01- represents Serial Numbers (start from 01)